Brother HL 3070CW User Manual
Page 155
Troubleshooting
145
6
1
(X) shows the toner cartridge or drum unit color that is near the end of its life. (K)=Black, (Y)=Yellow, (M)=Magenta, (C)=Cyan.
Maintenance messages
Error message
Meaning
Action
The toner cartridge is near the end of
its life.
Buy a new toner cartridge for the color that is
indicated on the LCD before you get a Replace
Toner
message.
Drums End Soon
The drum units are near the end of their
life.
Buy a new drum unit set before you get a Replace
Drums
message.
The drum unit for the color indicated on
the LCD is near the end of its life.
Buy a new drum unit for the color indicated on the
LCD before you get a Replace Drum (X)
message.
Belt End Soon
The belt unit is near the end of its life.
Buy a new belt unit before you get a Replace
Belt
message.
WT Box End Soon
The waste toner box is almost full.
Buy a new waste toner box before you get a
Replace WT Box
message.
Replace Toner
It is time to replace the toner cartridge.
Replace the toner cartridge for the color indicated
on the LCD. (See Replacing the toner cartridges
on page 105.)
Replace Drums
It is time to replace the drum units.
Replace the drum units. (See Replacing the drum
units on page 113.)
It is time to replace the drum unit for the
indicated color.
Replace the drum unit for the color indicated on
the LCD. (See Replacing the drum units
on page 113.)
Replace Belt
It is time to replace the belt unit.
Replace the belt unit. (See Replacing the belt unit
on page 118.)
Replace WT box
It is time to replace the waste toner box. Replace the waste toner box. (See Replacing the
Replace PF Kit1
It is time to replace the paper feeding
kit 1.
Replace the paper feeding kit 1. Call your dealer or
Brother Customer Service.
Replace Fuser
It is time to replace the fuser unit.
Replace the fuser unit. Call your dealer or Brother
Customer Service.
Call service messages
Call service message
Action
Print Unable ##
(Except Print Unable 1A)
Turn off the printer. Wait a few seconds, then turn it on again. If this does not clear the
error, call your dealer or a Brother Customer Service.