Brother HL 3070CW - Manual (Page 95)

Control Panel
85
3
General Setup
Submenu Menu Selections Options Descriptions
Local Language English */Français... Changes the LCD language for your
country.
Ecology Sleep Time 0 /1/2/3/4/5*...Min Sets the time to return to Power Save
mode.
Toner Save Off */On Increases the page yield of the toner
cartridge.
Panel Control Button Repeat 0.1 */0.4/0.6/0.8/1.0/1.4
/1.8/2.0 Sec
Sets the time for the LCD message to
change when holding + or - at
intervals.
Message Scroll Level 1 */Level
2 .../Level 10
Sets the time in seconds that an LCD
message will scroll across the LCD.
From Level 1=0.2 sec to Level
10=2.0 sec.
LCD Contrast -nnonn+ Adjusts the contrast of the LCD.
Auto Online On */Off Return to Ready state automatically.
Setting Lock Off */On Turns the lock panel settings On or
Off
using the password.
Reprint Off */On Turns the reprint settings On or Off.
Interface Select Auto */USB/Network Choose the interface you use.
Auto IF Time 1 /2/3/4/5*.../99 (sec) You need to set the time-out period
for the auto interface selection.
Input Buffer Level 1 /2/3/4*.../7 Increases or decreases the input
buffer capacity.
The factory settings are shown in Bold with an asterisk.
Print Menu
Submenu Menu Selections Options Descriptions
Emulation
(HL-3070CW only)
Auto */HP LaserJet/
BR-Script 3
Choose the emulation mode you use.
Auto Continue Off */On Choose whether to automatically
clear the removable error.
Output Color
(HL-3070CW only) Auto */Color/Mono Set the output color.
Media Type
(HL-3070CW only) Plain Paper */Thick
Paper /Thicker Paper/Th
in Paper /Recycled
Paper /Bond Paper/Envel
opes /Env.Thick/Env.Thi
n /Hagaki/Label
Sets the type of paper.
The factory settings are shown in Bold with an asterisk.