Brother HL 3070CW User Manual

Page 62

Driver and Software

Secure Print

Secure Print allows you to secure documents that are password protected when they are sent to the
printer. Only the people who know the password will be able to print them. Since the documents are
secured at the printer, you must enter the password using the control panel of the printer. The secured
document must have a Password and Job Name.

(For more information about the secure print function, see Printing Secure data on page 80.)

Password

Choose the password for your secured document that you send to the machine from the drop-down
box.

Job Name

Choose the Job name from the drop-down list for your secured document.

Toner Save

You can conserve toner use with this feature. When you set Toner Save Mode to On, print appears
lighter. The default setting is Off.

Note

We do not recommend Toner Save for printing Photo or Gray Scale images.

Sleep Time

When the printer does not receive data for a certain period of time, it enters sleep mode. In sleep
mode, the printer acts as though it were turned off. When you choose Printer Default the timeout
setting has been set to a specific time set at the factory, this can be altered in the driver or at the
printer. While the printer is in sleep mode, the LCD shows Sleep, but the printer can still receive data.
Receiving a print file or document or pressing Go will automatically wake up the printer to start
printing.

Color/Mono

You can choose the following color mode:

• Color

The device will print all pages in full color mode.

• Mono

Selecting Mono mode prints your documents in grayscale.

• Auto

The printer checks the content of your documents for color. If color is detected, it prints in color. If
no color content is detected, it prints in monochrome. The total printing speed may become slower.

Note

If the Cyan, Magenta or Yellow toner reaches the end of its life, choosing Mono will allow you to keep
printing as long as the Black toner does not reach the end of its life.