Brother DCP-8025D - Manual (Page 91)

6 - 16 USING THE DCP AS A PRINTER
5
Put the envelopes in the MP tray so that they touch the back of
the tray. Do not put more than 3 envelopes in the MP tray at any
one time, or it may cause a jam.
6
Press and slide the paper-width guide to fit the envelope size.
7
Send the print data to the DCP.
8
After you finish the print job, close the back output tray.
Make sure that the envelopes are neatly stacked and in the
proper position in the MP tray. If they are not, the envelopes may
not be fed properly, resulting in a skewed printout or a jam.
When you put envelopes in the MP tray, please remember the
following;
■
During printing, the inside tray rises to feed envelopes into
the DCP.
■
The side to be printed on must be face up.
■
Put the leading edge (top of the envelope) in first and push
it gently into the tray.