Brocade Communications Systems Brocade VDX 8770-4 - Manual (Page 80)

60 Brocade VDX 8770-4 Hardware Reference Manual
53-1002563-02
Air filter removal and replacement
5
FIGURE 17 Removal and replacement of the fan
‘
Replacing a fan
For the following procedure, refer to Figure 17 .
Complete the following steps to replace the fan in a chassis.
1. Orient the fan and slide it into the chassis, pushing firmly to ensure that it is seated.
2. Verify that the power LED displays a green light.
3. Use the screwdriver to tighten the four captive screws.
Air filter removal and replacement
You can remove and replace an air filter when it gets too clogged with dirt and dust to operate
efficiently. You should perform regular physical inspections to determine how often to replace the
filter. Maintaining clean air filters ensures optimal airflow through the devices.
The filters are single use, non-recyclable. They have a UL fire rating of FLAME RETARDANT,UL
94HF-1 UAF and PPI measurement of 25.