Removal and replacement procedures, In this chapter, Introduction – Brocade Communications Systems Brocade VDX 8770-4 User Manual
Page 67: Esd precautions, Chapter 5, Chapter 5, “removal and replacement procedures

Brocade VDX 8770-4 Hardware Reference Manual
47
53-1002563-02
Chapter
5
Removal and Replacement Procedures
In this chapter
•
•
•
Cable management finger assembly removal and replacement . . . . . . . . . 48
•
Line card removal and replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
•
Management module removal and replacement . . . . . . . . . . . . . . . . . . . . . 52
•
Switch fabric module removal and replacement. . . . . . . . . . . . . . . . . . . . . . 54
•
Power supply removal and replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
•
•
•
Module filler panel removal and replacement . . . . . . . . . . . . . . . . . . . . . . . 63
•
Chassis ID card removal and replacement . . . . . . . . . . . . . . . . . . . . . . . . . . 64
•
SFP transceiver removal and replacement . . . . . . . . . . . . . . . . . . . . . . . . . . 65
•
QSFP transceiver removal and replacement . . . . . . . . . . . . . . . . . . . . . . . . . 67
•
Introduction
NOTE
Refer to the safety notices before servicing (
The field-replaceable units (FRUs) in the Brocade VDX 8770-4 can be removed and replaced
without special tools. The Brocade VDX 8770-4 can continue operating during many of the FRU
replacements if the conditions specified in the procedures are followed.
The following sections contain FRU removal and replacement procedures.
DANGER
The procedures in this manual are for qualified service personnel.
ESD precautions
The Brocade VDX 8770-4 contains ESD-sensitive FRUs. When working with any Brocade VDX
8770-4 FRU, use correct electrostatic discharge (ESD) procedures.