Brother FAX-1030E User Manual
Page 106
99
Chapter 15
To access the menu, press
Menu/Set.
To exit, press
Stop/Exit.
* The factory setting (option) is shown in bold.
8. SETUP MSG CTR
(FAX-1030e
Only)
1. MESSAGE
STORE
DOC:ON
DOC:OFF
VOICE:ON
VOICE:EXT
VOICE:OFF
Select if memory will store
fax, voice or both.
2. BACKUP PRINT
ON
OFF
Automatically prints a copy
of faxes received into
memory.
3. OGM
MSG CTR OGM
FAX/TEL OGM
PAGING OGM
Select/Record outgoing
message.
4. ICM MAX.TIME
20-60 seconds
(Factory setting is 30
seconds)
Select maximum length of
incoming messages.
5. ICM
REC.MONITR
ON
OFF
Select ON or OFF for voice
messages as they come in.
6. FAX
FWD/PAGING
OFF
FAX FORWARD
PAGING
Set fax machine to forward
fax/message—OR—to call
your pager.
7. REMOTE
ACCESS
159
Set code for retrieving
messages.
0. MISCELLANEOUS
1. MEM SECURITY
—
Prohibits most functions
except receiving faxes into
memory.
2. CALLER ID
DISPLAY ID
PRINT REPORT
View and dial back, or print a
list of the last 30 Caller IDs
stored in memory.
3. DISTINCTIVE
(Not available in
New Zealand)
ON
OFF
Use with phone company
distinctive ringing service to
register the ring pattern with the
machine.
3. FAXABILITY
(Only for New
Zealand)
ON
OFF
If you have FaxAbility from
Telecom, you can use this
function to store the ringing
pattern of your fax number.
And if you set it to ON, you
should use the registered
number as a fax number only.
Main Menu
Menu
Selections
Options
Descriptions
Page
to accept