Brother FAX-1030E - Manual (Page 10)

3
7 Making a Single Copy
Insert the document face down in the Automatic Document Feeder.
Press Copy.
Press Copy. (See Making Copies, page 26.)
To cancel, press Stop/Exit.
Your machine cannot scan anything closer than 4 mm from the edge of the paper.
Do NOT pull the paper while copying is in progress.
8 Setting up the Answer phone (TAD) (Only for FAX-1030e)
Press Menu/Set, 8, 1. The screen prompts you to choose a DOC (Document) setting.
Press or to select ON (or OFF), and press Menu/Set.
The screen prompts you to choose a VOICE setting.
Press or to select your setting from the list (ON, OFF or EXT), and press
Menu/Set when the screen displays your selection.
Press Stop/Exit.
Press Menu/Set, 8, 3. The screen prompts you to choose an OGM.
Press or to reach MSG CTR OGM.
This is the only setting you can select if you want to turn the Message Centre on.
Press Menu/Set.
Press or to select RECORD MSG and press Menu/Set.
Pick up the handset to record a message.
For example: Hello. We are unable to take your call at this time. Please leave a message after
the tone. If you wish to send a fax, please press
5 1 ( 9 1 for New Zealand), wait for the
fax tones, then press the start button on your machine. (See Recording the Message Centre’s
Outgoing Message (MSG CTR OGM), page 64.)
Replace the handset. The Message Centre plays your OGM.
Press Stop/Exit.
Activate Message Centre (TAD) Mode by pressing .
1
2
3
1
2
3
4
5
6
7
8
9
10
11
12