Brother MFC-8440 B - Manual (Page 80)

4 - 12 GETTING STARTED
Setting the Tray Use for Fax mode
If your MFC doesn’t have the optional tray #2, you can skip this
setting.
The default setting of Auto allows your MFC to choose the optional
Tray #2 if Tray #1 is out of paper or if incoming faxes will fit best on
the paper in Tray #2.
1
Press Menu , 1 , 8 .
2
Press or to select
Tray#1 Only , Tray#2 Only, or
Auto .
3
Press Set .
4
Press Stop/Exit .
Setting the LCD Contrast
You can change the contrast to help the LCD look lighter or darker.
1
(MFC-8440)
Press Menu , 1 , 7 .
(MFC-8640D/8840D/8840DN)
Press Menu , 1 , 8 .
—OR—
If you have the optional tray #2, press Menu , 1 , 9 .
2
Press to increase the contrast.
—OR—
Press to decrease the contrast.
Press Set .
3
Press Stop/Exit .
If Auto Reduction is turned on, incoming faxes will be printed
from the tray that is set for Auto Reduction. (See Printing a
reduced incoming fax (Auto Reduction) on page 5-5.)
18.Tray Use: Fax
▲ Tray#1 Only
Tray#2 Only
▼ Auto
Select ▲▼ & Set
19.LCD Contrast
- +
Select & Set