Brother MFC-8440 B - Manual (Page 64)

3 - 11 ON-SCREEN PROGRAMMING
If your machine is MFC-8840DN or you installed optional LAN
board (NC-9100h), the LCD shows the following LAN menu.
Main Menu Submenu Menu
Selections Options Descriptions Page
6 .LAN
(MFC-8840DN
or option)
1 .Setup
TCP/IP
1 .BOOT Method Auto
Static
RARP
BOOTP
DHCP
You can choose the
BOOT method that
best suits your
needs.
See
Network
User’s
Guide
on the
CD-ROM.
2 .IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3 .Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet
mask.
4 .Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5 .Host Name BRN_XXXXXX Enter the Host name.
6 .WINS Config Auto
Static
You can choose the
WINS configuration
mode.
7 .WINS
Server
Primary
Secondary
Specifies the IP
address of the
primary or secondary
server.
8 .DNS Server Primary
Secondary
Specifies the IP
address of the
primary or secondary
server.
9 .APIPA On
Off
Automatically
allocates the IP
address from the
link-local address
range.
The factory settings are shown in Bold with .
to accept
to
exit
Press the Menu numbers.
(ex. Press 1, 1 for Mode Timer)
— OR —
to select to select