Brother MFC-8440 B - Manual (Page 45)

PAPER 2 - 2
■
Before you buy a large amount of paper, please test some to
make sure that the paper is suitable.
■
Use paper that is made for plain-paper copying.
■
Use paper that is 20 to 24 lb (75 to 90 g/m 2 ).
■
Use neutral paper. Do not use acidic or alkaline paper.
■
Use long-grain paper.
■
Use paper with a moisture content of approximately 5%.
Caution
Do not use ink jet paper. It may cause a paper jam and damage your
MFC.
Choosing acceptable paper
We recommend that you test paper (especially special sizes and
types of paper) on the MFC before purchasing large quantities.
■
Avoid feeding label sheets that are partly used or your MFC will
be damaged.
■
Avoid using coated paper, such as vinyl coated paper.
■
Avoid using preprinted or highly textured paper, or paper with an
embossed letterhead.
For optimum printing, use a recommended type of paper, especially
for plain paper and transparencies. For more information on paper
specifications, call your nearest authorized sales representative or
the place where you purchased your MFC.
■
Use label or transparencies that are designed for use in laser
printers.
■
For the best print quality, we recommend using long-grained
paper.
■
If you are using special paper and the paper has problems
feeding from the paper tray, try again using the manual feed tray
or multi-purpose tray.
■
You can use recycled paper in this MFC.
The output quality depends on the paper type and paper brand.
Visit us at http://solutions.brother.com and check the latest
recommendations for paper that can be used with the
MFC-8440, MFC-8640D, MFC-8840D and MFC-8840DN.