Brother MFC-8440 B - Manual (Page 134)

9 - 1 PRINTING REPORTS
9
MFC settings and activity
You need to set up the Transmission Verification Report and Activity
Report Interval in the menu table.
Press Menu , 2 , 4 , 1 .
—OR—
Press Menu , 2 , 4 , 2 .
Customizing the
Transmission Verification Report
You can use the Transmission Report as proof that you sent a fax.
This report lists the time and date of transmission and whether the
transmission was successful (OK). If you select On or On+Image, the
report will print for every fax you send.
If you send a lot of faxes to the same place, you may need more than
the job numbers to know which faxes you must send again. Selecting
On+Image
or Off+Image will print a section of the fax’s first page
on the report to help you remember.
1
Press Menu , 2 , 4 , 1 .
2
Press or to select Off ,
Off+Image , ON or On+Image.
Press Set .
3
Press Stop/Exit .
Printing reports
When the feature is Off, the Report will only print it there is a
transmission error. (NG).
24.Setup Reports
1.Transmission
2.Act.Interval
Select ▲▼ & Set
24.Setup Reports
1.Transmission
▲ Off
▼ Off+Image
Select ▲▼ & Set