Brother MFC-8440 B - Manual (Page 121)

AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 3
3
Press or to select
Fax/Tel . Press Set .
4
Enter the phone or fax number (up
to 20 digits). Press
Set .
5
Use the dial pad to enter the name (up to 15 characters).
Press
Set .
(You can use the chart on page 4-3 to help you enter letters.)
—OR—
Press
Set to store the number without a name.
6
Go to Step 2 to store another Speed-Dial number.
—OR—
Press
Stop/Exit .
Changing One-Touch and Speed-Dial numbers
If you try to store a One-Touch or Speed-Dial number where a
number has already been stored, the LCD will show the name that
has been stored there (or number) and will ask you to do one of the
following:
1
Press 1 to change the stored
number.
—OR—
Press 2 to exit without making a
change.
2
Enter a new number.
Press
Set .
■
To erase the whole number or whole name, press
Clear/Back repeatedly until all digits or letters are deleted.
To erase one digit or letter, use or to position the
cursor under it, and then press Clear/Back .
■
If you want to insert characters, use or to position the
cursor where you want to insert them, and then type.
3
Follow the directions beginning at Step 5 in Storing One-Touch
Dial numbers and Storing Speed-Dial numbers. (See Storing
One-Touch Dial numbers on page 7-1 and Storing Speed-Dial
numbers on page 7-2.)
23.Set Auto Dial
#005
▲ Fax/Tel
▼ E-Address
Select ▲▼ & Set
23.Set Auto Dial
*005:MIKE
▲ 1.Change
▼ 2.Exit
Select ▲▼ & Set