Nokia 6670 - Manual (Page 84)

Nokia 6670 User Guide 83 Copyright © 2005 Nokia
Tools and applications
• VOICE COMMANDS
Select Menu > Tools > Voice com..
Options in Voice commands are Add voice command , Open ,
New application , Playback , Change , Delete , Delete all , Help ,
and Exit .
You can use voice commands to start applications and profiles, and to dial
numbers from Contacts, without having to look at the phone display. You
record a word, or words, (voice command) and then say this voice command to
open an application, activate a profile, or dial a number.
You can have only one voice command per item. Any spoken words can be a
voice command.
When recording, hold the phone at a short distance away from your mouth.
After the starting tone, say clearly the word, or words, you want to record as a
voice command.
Voice commands have the same requirements as voice tags. Before recording a
voice command, see “Requirements for voice tags” on page 37.
Note: You must say the voice command exactly as you said it when
you recorded it. This may be difficult in, for example, a noisy
environment or during an emergency, so you should not rely solely
upon voice commands in all circumstances.
Add a voice command to an application
1 In Voice commands, scroll to the application to which you are adding a
voice command, and select Options > Add voice command. To add a voice
command to a profile, you must have the Profiles folder open and a specific
profile selected.
Press ’Start’, then speak after tone is displayed.
2 Press Start to record a voice command.
The phone sounds a starting tone, and the note Speak now is displayed.
3 Say the voice command.
The phone will stop recording after approximately 5 seconds. After recording,
the phone plays the recorded command. Voice command saved is displayed,
and a beep sounds. A symbol
can be seen next to the application.
If you do not want to save the recording, press Quit before the recording stops.