Nokia 6670 - Manual (Page 85)

84 Copyright © 2005 Nokia
Add an application to the list
You can assign voice commands to other applications that are not listed in the
Voice commands main view.
1 In the Voice commands main view, select Options > New application.
Available applications are displayed.
2 Scroll to the application that you want to add, and press Select.
3 Add a voice command to the new application. See "Add a voice command
to an application" on page 83.
Use a voice command to start an application
1 In the standby mode, press and hold the Right selection key.
A short tone is played, and Speak now is displayed.
2 When you start an application by saying a voice command, hold the phone
a short distance from your mouth, and say the voice command clearly.
The phone plays the original voice command and starts the application.
3 If the phone plays the wrong voice command, press Retry.
Replay, erase, or change a voice command
To replay, erase, or change a voice command, scroll to the item that has a voice
command (indicated by
), and select Options and one of the following:
Playback—Listen to the voice command again.
Delete—Erase the voice command.
Change—Record a new voice command. Press Start to record.
• DEVICE MANAGER
This feature is operator dependent and may not be available
on all phones. Contact your service provider for information
and availability.
Select Menu > Tools > Dev. mgr.
Options in Device manager are Connect , New profile , Edit profile , Delete
profile , Enable or Disable configurations , View log , Help , and Exit .
When you need help with difficult phone configurations, Device manager
allows a third party, such as your service provider, to assist you directly with
phone settings. To allow device management, your phone must establish a
connection and synchronize with the third party’s server. You can start the
synchronization session from your phone, and you can accept or reject
server-initiated synchronization attempts.