Nokia 6670 - Manual (Page 118)

Nokia 6670 User Guide 117 Copyright © 2005 Nokia
Connectivity
Bluetooth connection settings
• Bluetooth—Select On if you want to use a Bluetooth connection. If you
select Off, all active Bluetooth connections are ended, and Bluetooth
connection cannot be used for sending or receiving data.
• My phone's visibility—If you select Shown to all, your phone can be found
by other devices during device search. If you select Hidden, your phone
cannot be found by other devices.
• My phone’s name—Define a name for your phone.
After you have set your Bluetooth connection as active and changed My phone's
visibility to All, your phone and this name can be seen by other devices.
Send data by Bluetooth connection
Your phone can only have one active Bluetooth connection at a time.
1 Open an application where the item you wish to send is stored.
For example, to send a photo to another
device, open the Gallery application.
2 Scroll to the item you want to send, and
select Options > Send > Via Bluetooth.
The phone starts to search for devices
within range. Devices using Bluetooth
technology that are within range start to
appear on the display one by one.
You can see a device icon, the device name,
the device type, or a short name.
Paired devices are shown with . A paired
device is one where a Bluetooth connection
already exists between your phone and the other device.
To interrupt the search, press Stop. The device list freezes and you can start
to form a connection to one of the devices already found.
When searching for devices, some devices may show only the unique device
addresses. To find out the unique address of your phone, enter the code
*#2820# in the standby mode.
If you have searched for devices earlier, a list of the devices that were
found previously is shown first. To start a new search, select More devices.
If you switch off the phone, the list of devices is cleared and the device
search needs to be started again before sending data.
3 Scroll to the device with which you want to connect and press Select.
The item you are sending is copied to Outbox and the note Connecting
is shown.