beautypg.com

Region selection, Properties menu – Toshiba Qosmio G40 User Manual

Page 99

background image

User’s Manual

4-33

Qosmio G40

Region selection

Telecommunication regulations vary from one region to another, so you will
need to make sure the internal modem’s settings are correct for the region
in which it will be used.

To select a region, follow the steps as detailed below:

1. Click Start -> All Programs -> TOSHIBA -> Networking -> Modem

Region Select.

2. The Region Selection icon will appear in the Windows Task Bar.

3. Click the icon with the primary (left) mouse button to display a list of

regions that the modem supports, together with a sub-menu which
details telephony location information - a check mark will appear next to
the currently selected region and telephony location.

4. Select either a region from the region menu or a telephony location from

the sub-menu.

When you click a region it becomes the modem’s default selection
for any new dialling locations that are created within the Windows
Control Panel (Phone and Modem Options).

When you select a telephony location, the corresponding region is
automatically selected and becomes the modem’s default setting.

Properties menu

Click the icon with the secondary (right) mouse button in order to display a
Properties menu on the screen.

The built-in modem can be used only in specified countries and regions.
Using the modem in an area not specified for use may cause a system
failure. Check the specified areas carefully before using it.

If it is available, do not use the Country/Region Select function included as
part of the modem setup utility within the Control Panel - if you change the
country/region setting this way you may find that the change does not take
effect.