Toshiba Qosmio G40 - Manual (Page 88)

4-22 User’s Manual
Qosmio G40
When writing or rewriting
Please observe the following points while you write or rewrite data to CD-R,
CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double
Layer), DVD+RW, DVD-RAM or HD DVD-R media:
■
Always copy data from the hard disk drive to the optical media - do not
use the cut-and-paste function as the original data will be lost if there is
a write error.
■
Do not perform any of the following actions:
■
Change users in the Windows Vista™ operating system.
■
Operate the computer for any other function, including such tasks as
using a mouse or Touch Pad, or closing/opening the display panel.
■
Start a communication application such as a modem.
■
Apply impact or vibration to the computer.
■
Install, remove or connect external devices, including such items as
a PC Card, SD/SDHC memory card, miniSD/microSD Card,
ExpressCard, Memory Stick/Memory Stick PRO/Memory Stick PRO
Duo, xD picture card, MultiMediaCard, USB device, external
monitor, i.LINK device, or an optical digital device.
■
Use the audio/video control button to reproduce music or voice.
■
Open the optical disc drive.
■
Do not use shut down, log off, Sleep Mode or Hibernation Mode
functions while writing or rewriting.
■
Make sure that the write/rewrite operation is completed before going
into either Sleep Mode or Hibernation Mode (writing is completed if you
can remove an optical media on the HD DVD-R drive).
■
If the media is of poor quality, or is dirty or damaged, writing or rewriting
errors may occur.
■
Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains or cars. In addition, do not use the
computer on an unstable surface such as a stand.
■
Keep mobile phones and other wireless communication devices away
from the computer.