Power-up modes, Power-up modes -15 – Toshiba Qosmio G40 User Manual
Page 131
User’s Manual
6-15
Qosmio G40
To enter a password manually, follow these steps:
1. Turn on the power as described in Chapter 3,
. The
following message will appear in the screen:
S
Password=
2. Enter the Password.
3. Press ENTER.
Power-up modes
The computer has three different power-up modes as follows:
■
Boot Mode: The computer will shut down without saving data -
in view of this you must always save your work before you turn the
computer off.
■
Hibernation Mode: Data in memory will be saved to the hard disk drive.
■
Sleep Mode: Data will maintained in the computer’s memory.
Windows utilities
You can configure various settings associated with both Sleep Mode and
Hibernation Mode within the Power Options (to access it, Start -> Control
Panel -> System and Maintenance -> Power Options).
Hot keys
You can use the FN + F3 hot key to enter Sleep Mode or FN + F4 to enter
Hibernation Mode - please refer to Chapter 5,
for further
details.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.
Please refer to the sections
and
for further information.