Toshiba Qosmio G40 - Manual (Page 136)

7-4 User’s Manual
Qosmio G40
USB Memory BIOS Support Type
This option allows you to set the type of the USB memory to be used as a
startup device.
Keyboard
Wake-up on Keyboard
When this feature is enabled, and the computer is in Sleep Mode, you can
turn on the system by pressing any key. However, please be aware that this
option will only work with the internal keyboard and only when the computer
is in Sleep Mode.
USB -> Built-in
HDD1 -> Built-in
HDD2 The priority is set as USB -> built-in HDD1 ->
built-in HDD2.
USB -> Built-in
HDD2 -> Built-in
HDD1 The priority is set as USB -> built-in HDD2 ->
built-in HDD1.
■
If a boot command is not found on the first detected hard disk drive, the
system will not boot from next hard disk drive in the list, instead it will
search for the next device in the Boot Priority list and startup from this
as appropriate.
■
Although, generally, most models have two hard disk drives installed,
some models have only one hard disk drive. In the case of models with
one hard disk drive, this setting item will not be displayed.
HDD Sets the USB memory to be the equivalent of a
hard disk drive (default). With this setting, the
USB memory device can be used to start the
computer as though it were a hard disk drive
based on the hard disk drive settings within both
the Boot Priority and HDD Priority options
detailed previously.
FDD Sets the USB memory to be the equivalent of a
floppy diskette drive. With this setting, the USB
memory device can be used to start the
computer as though it were a floppy diskette
based on the floppy diskette drive settings within
the Boot Priority option detailed previously.
Enabled Enables the Wake-up on Keyboard function.
Disabled Disables the Wake-up on Keyboard function
(Default).