Toshiba Qosmio G40 - Manual (Page 175)

User’s Manual 9-15
Qosmio G40
7. Grasp the module by its edges and remove it from the computer.
Removing the memory module
8. Seat the memory module cover in place and secure it with two screws.
9. Install the battery pack - refer to Replacing the battery pack section in
Chapter 6, Power , if required.
10. Turn your computer over.
Battery Packs
You can increase the portability of the computer with additional battery
packs so that, if you’re away from an AC power source and your battery
runs low, you can replace it with a freshly charged battery. Please refer to
Chapter 6,
Power for further information.
Universal AC Adaptor
If you frequently use your computer at more than one site, it may be
convenient to purchase an additional AC adaptor to be kept at each site in
order to remove the need to always carry the adaptor with you.
■
If you use the computer for a long time, the memory modules and the
circuits located close to the memory modules will become hot. In this
case, let them cool to room temperature before you replace them.
■
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
Latches
Slot B
Slot A
Take care to ensure that the memory module cover is firmly closed.