Toshiba Magnia Z500 User Manual

Page 98

The access authority for the entered community name is set to "READ ONLY." When changing it to
"READ WRITE," select the entered community name and select the "READ WRITE" radio button at
right.

Lastly, press the [Apply] button to change the setting.

Notice
The SNMP setup page is used to update the setup page but not to change the settings during operation.
This is to avoid affecting the service that the SNMP agent is using on a non-wireless LAN because when a
change is reflected, the SNMP agent (snmpd) shuts down temporarily. To reflect the change, log in by root
and manually execute the following command.

# /etc/rc.d/init.d/snmpd restart

You can achieve similar effects by restarting the active OS with the following command. However,

another service stops over a relatively long period of time; therefore, use the above method as much

as possible.

# reboot

Notice

When the command is executed, the network shuts down temporarily as explained above; therefore, the

service of using the SNMP agent including the wireless LAN may become abnormal. Before executing the

command, fully check the operation status of another network service. For information on executing the

command, consult with your server administrator.