Toshiba Magnia Z500 - Manual (Page 95)

[For Windows 2000]
For information on installing the SNMP Extension Agent, see the following section.
[2.1.1.2 For installation in Windows 2000]
The following describes the settings to be made after the SNMP Extension Agent is installed.
1. Open [Management tool] on the Control Panel on the server (access point).
2. Open the [Service] icon.
3. Select [SNMP Service] from the service list and open its property.
When the [Security] tab is selected, the page explained in [For Windows NT] above is displayed.
The items to be set are the same as in [For Windows NT].