Using the utility, 2 using the utility – Toshiba Magnia Z500 User Manual

Page 45

3.2.2 Using the utility

When the Access Point Configuration Utility is activated, the main screen having the following four
pages:

[Basic Setting]
[WEP]
[Access Restriction]
[Hardware Resource](displayed only when Windows NT is used)

Immediately after the utility starts, the current settings of the MAGNIA Software Access Point are
displayed on the respective pages.

Buttons common to all pages

Item Explanation

[Connect to] button

Displays the connection destination setting screen. Use this

button to be connected to the remote Software Access Point.

[Close] button

Quits the Access Point Configuration Utility.

[Refresh] button

Refreshes the settings.

[Apply] button

Applies the changes made on the settings.