Toshiba Magnia Z500 - Manual (Page 28)

2.1.1.3 For installation in Linux
This section describes the procedure for installing the Linux-version MAGNIA Software Access
Point.
For information about a general operation procedure for using Linux by login by root, refer to
general documents related to Linux or the Red Hat WEB site.
To install the Linux-version MAGNIA Software Access Point, use the rpm command. The specific
procedure is as follows.
Step 1 Log in by root.
Step 2 Mount Server Setup Tool CD.
# mount /mnt/cdrom
Step 3 Move to the directory in which the rpm package of the Linux-version MAGNIA Software
Access Point is stored.
for Red Hat 7.2
for Turbolinux 7
Step 4 Install the Linux-version MAGNIA Software Access Point, using the rpm command.
Here, the example of installing the version called 1.0-0 is given.
for Red Hat 7.2
# cd /Linux/RedHat7.2/TOSHIBA/TSAP/RPMS
# cd /Linux/Turbo7/TOSHIBA/TSAP/RPMS
# rpm -i bridge-utils-0.9.3-1.i386.rpm
# rpm -i tsap-2.4.7-10-2.0-0.i386.rpm
for Turbolinux 7
# rpm -i bridge-utils-0.9.3-1.i386.rpm
# rpm -i tsap-2.4.9-3-2.0-0.i586.rpm