Toshiba Magnia Z500 - Manual (Page 92)

4.3.2.3 Radio LAN station
The following is the setting procedure for the radio LAN station.
Step 1 Setting the 802.1X station
See "Configuration Example (1)."
[4.3.1.5 Radio LAN station]
Step 2. Setting a non-802.1X station
Enable the WEP function and specify in the first key the value that is the same as that of [Key 1]
set at the AP.
Memo
More than one WEP key cannot be set, depending on the setting utility of the radio LAN station.
In this case, the radio LAN station may not be able to be connected.
4.3.2.4 Check items
In the following items, check whether the environment is correctly established.
For 802.1X station
See "Configuration Example (1)."
[4.3.1.6 Check items]
For non-802.1X station
Use the ping command to check whether the station can connect to the network.