Toshiba Magnia Z500 - Manual (Page 87)

Step 2. Setting the 802.1X function in the radio LAN station
Next, set the 802.1X function.
The following procedure is to enable the 802.1X function. The other settings for the radio LAN
network are omitted.
For details on each item, refer to the online Help of Windows XP.
1. Open [Wireless Network Connection Properties].
2 Select the [Authentication] tab.
Place a check mark in the [Enable network access control using IEEE 802.1X] check
box.
Select [Smart Card or other Certificate] in the [EAP type] edit box.
Press the [Properties] button.