Toshiba Magnia Z500 - Manual (Page 54)

3. In the [Computer Name] field, enter the computer name or IP address of the server
(access point).
4. In the [Community Name] field, enter the name of the community to be used.
5. Press the [Connect] button.
3.3.2 Using the utility
The method for using the utility is the same as when you use the Access Point Configuration
Utility in local mode (on the server). However, the [Hardware resource] page is not displayed.
For details, see the following section.
[3.2 Access Point Configuration Utility (Local)]
Memo
When you use from a wireless LAN station, do not write the information to the access point which
the station has connected.