Toshiba Express Port Replicator II - Manual (Page 30)

EN-30 User’s Manual
TOSHIBA Express Port Replicator II
Hardware issues
Serial port issues
Problem Solution(s)
Cannot operate the
computer lock switch
The computer lock switch cannot be operated
when a security cable is attached to the
security lock slot. Remove the security cable
from the slot and then move the computer lock
switch.
Cannot operate the Eject
lever
Remove the security cable from the security
lock slot, if applicable, and set the computer
lock switch to the unlocked position. Then
operate the Eject lever again.
My computer will not fit
on the port replicator
Extend the port replicator by squeezing and
pulling the extension release. See Setting up
the port replicator for more information.
Problem Solution(s)
The serial port does not
work
The serial driver on the included CD must be
installed on your computer before you connect
a device to the serial port. For more
information, see Setting up the port replicator .
Try reinstalling the serial driver if you have
already installed it.
Check the documentation that came with your
serial device or check with your serial device
manufacturer for product updates.
Due to the USB to Serial emulation limitations,
not all legacy serial devices may work.