Toshiba Express Port Replicator II - Manual (Page 16)

EN-16 User’s Manual
TOSHIBA Express Port Replicator II
5. Connect the included AC adaptor to the port replicator.
Your port replicator will come with either a 2-pin or a 3-pin plug,
depending on where it was purchased.
(Sample Illustration) 2-pin and 3-pin AC adaptors
a Connect the provided power cord to the AC adaptor.
b Connect the AC adaptor to the DC-IN (15V) connector on the port
replicator.
(Sample Illustration) Connecting the AC adaptor to the port replicator
c Connect the power cord plug to a live electrical outlet.
6. Find the number (1 - 12) imprinted on the bottom of your computer next
to the expansion port. This number indicates the extension setting to
use for your computer model.
The supplied power cord conforms to safety rules and regulations in
the region where the product was purchased. Do not use the AC
adaptor that was included with your computer. Always use the
Toshiba AC adaptor that was provided with this product or use
Toshiba recommended alternate adaptors to avoid any risk of fire
and/or other damage to the computer and/or port replicator. Use of
an incompatible AC adaptor could cause fire and/or damage to the
computer and/or port replicator, possibly resulting in serious injury.
TOSHIBA assumes no liability for any damage caused by use of an
incompatible adaptor.
WARNING
When you connect the AC adaptor to the port replicator, always
follow the steps in the exact order as described below. Connecting
the power cable to a live electrical outlet should be the last step,
otherwise the adaptor DC output plug could hold an electrical charge
and cause an electrical shock or minor bodily injury when touched.
As a general safety precaution, avoid touching any metal parts.
WARNING