Toshiba Express Port Replicator II - Manual (Page 27)

User’s Manual EN-27
TOSHIBA Express Port Replicator II
Power issues
Problem Solution(s)
Docked computer will not
turn on (Your computer’s
AC power light does not
turn on)
Check the connections. Make sure the power
cord is firmly connected to the port replicator
and a live electrical power outlet.
Check the condition of the power cord and plug
prongs. If the cord is frayed or damaged or the
plug prongs are bent, replace the cord. If the
plug prongs are soiled, wipe them with a clean
cloth.
Disconnect and reconnect the AC adaptor and
try again to turn on the computer.
If the port replicator still does not power the
computer, contact Toshiba support. For contact
information, please see If you need further
assistance .
Docked computer enters
Resume mode and shuts
down
If the computer’s internal temperature becomes
too high, the computer will automatically enter
Resume mode and shut down. Leave the
computer off until its interior reaches room
temperature.
If the computer has reached room temperature
and still does not start, or if it starts but shuts
down quickly, contact Toshiba support. For
contact information, please see If you need
further assistance .
Docked computer shuts
down and its AC power
light is flashing
Indicates a problem with the heat dispersal
system of the computer. Please contact
Toshiba support. For contact information,
please see If you need further assistance .