beautypg.com

Recordnow! basic for toshiba, Recordnow! basic for toshiba -15 – Toshiba Qosmio G10 User Manual

Page 92

background image

User’s Manual

4-15

Operating Basics

Install, remove or connect external devices, including the following:
PC Card, USB devices, external display, optical digital devices.

Use the Audio/Video control button to reproduce music or voice.

Open the DVD-ROM&CD-R/RW or DVD Super Multi drive.

Do not use shut down/log off and Standby Mode/Hibernation Mode
while writing or rewriting.

Make sure writing or rewriting is completed before going into Standby
Mode/Hibernation Mode. Writing is completed if you can open the DVD-
ROM&CD-R/RW or DVD Super Multi drive tray.

Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains, or cars. Do not use an unstable
surface such as a stand.

Keep mobile phones and other wireless communication devices away
from the computer.

Always copy data from the HDD to the DVD-RAM. Do not use cut-and-
paste. The original data will be lost if there is a write error.

RecordNow! Basic for TOSHIBA

Note the following limitations when you use RecordNow!:

DVD-Video cannot be created using RecordNow!.

DVD-Audio cannot be created using RecordNow!.

You cannot use RecordNow!'s “Audio CD for Car or Home CD Player”
function to record music to the DVD-R/-RW or DVD+R/+RW discs.

Do not use the “Exact Copy” function of RecordNow! to copy DVD-
Video and DVD-ROM with copyright protection.

DVD-RAM disc cannot be backed up with the “Exact Copy” function of
RecordNow!.

You cannot back up a CD-ROM or CD-R/RW to DVD-R/-RW or DVD+R/
+RW using the “Exact Copy” function of RecordNow!.

You cannot back up DVD-ROM, DVD-Video or DVD-R/-RW or DVD+R/
+RW to CD-R/RW using the “Exact Copy” of RecordNow!.

RecordNow! cannot record in packet format.

You might not be able to use the “Exact Copy” function of RecordNow!
to back up a DVD-R/-RW or DVD+R/+RW disc that was made with
other software on a different DVD-R/-RW or DVD+R/+RW recorder.

If you add data to a DVD-R and DVD+R disc that you have already
recorded to, you might not be able to read the added data under some
circumstances. It cannot be read in 16-bit operating systems, such as
Windows 98SE and Windows ME. In Windows NT4, you will need
Service Pack 6 or later to read added data. In Windows 2000, you will
need Service Pack 2 or later to read it. Some DVD-ROM and DVD-
ROM&CD-R/RW drives cannot read added data regardless of the
operating system.

RecordNow! does not support recording to DVD-RAM discs. To record
to a DVD-RAM, use Windows Explorer or other utility.