beautypg.com

Extending battery life, Replacing the battery pack, Extending battery life -11 – Toshiba Qosmio G10 User Manual

Page 125: Replacing the battery pack -11

background image

User’s Manual

6-11

Power

Extending battery life

To maximize the life of your battery pack:

At least once a month, disconnect the computer from a power source
and operate it on battery power until the battery pack fully discharges.
Before doing so, follow the steps below.

If you have extra battery packs, rotate their use.

If you will not be using the system for an extended period, more than
one month, remove the battery pack.

Disconnect the AC adaptor when the battery is fully charged.
Overcharging makes the battery hot and shortens life.

If you are not going to use the computer for more than eight hours,
disconnect the AC adaptor.

Store spare battery packs in a cool dry place out of direct sunlight.

Replacing the battery pack

When the battery pack reaches the end of its operating life you will need to
install a new one. The life of the battery pack is generally about 500
recharges. If the Battery indicator flashes orange shortly after fully
recharging the battery, the battery pack needs to be replaced.

You might also replace a discharged battery pack with a charged spare
when you are operating your computer away from an AC power source.
This section explains how to remove and install the battery pack.

1. Turn off the computer’s power.

2. Disconnect the AC adaptor and turn on the computer’s power. If it

does not turn on go to step 4.

3. Operate the computer on battery power for five minutes. If the

battery pack has at least five minutes of operating time, continue
operating until the battery pack is fully discharged. If the Battery
indicator flashes or there is some other warning to indicate a low
battery, go to step 4.

4. Connect the AC adaptor to the computer and the power cord to a

power outlet. The DC IN indicator should glow green, and the
Battery indicator should glow orange to indicate that the battery
pack is being charged. If the DC IN indicator does not glow, power
is not being supplied. Check the connections for the AC adaptor
and power cord.

5. Charge the battery pack until the Battery indicator glows green.