Toshiba Qosmio G10 - Manual (Page 178)

User’s Manual 9-19
Optional Devices
Connecting the S-Video-in port
2. Insert the other end of the S-Video-in cable into the output port of the
analog device you wish to connect. To hear sounds, use a video cable
to connect the sound terminals of the audio device and your computer
(red: sound, right channel, white: sound, left channel).
After connecting an analog video camera or a video deck to your computer,
run WinDVR. WinDVR is started by selecting Start -> All Programs ->
InterVideo WinDVR.
Model without the TV Tuner
The model without the TV tuner only supports the Monitor Input feature.
This feature allows you to display video from a device such as an analog
video camera or game machine on the LCD of your computer while
Windows is running by connecting such device to the S-Video-in port of
your computer. Refer to the section
Switching video Input for the
information how to configure the feature.
i.LINK (IEEE1394)
i.LINK (IEEE1394) is used for high-speed data transfer for a range of
compatible devices such as
■ Digital video cameras
■ Hard disk drives
■
MO drives
■ CD-RW drives
Precautions
■ Make a back-up of your data before transferring it to the computer.
There is a possibility that the original data will be damaged. There is a
particular risk that some frames will be deleted in the case of digital
video transfer. TOSHIBA assumes no liability for such loss of data.
S-Video-in port
i.LINK uses a four-pin connector, which does not carry electric current.
External devices will need their own power supply.