Toshiba Qosmio G30 HD-DVD (PQG32) - Manual (Page 36)

1-14 User’s Manual
Introduction
Utilities
This section describes the pre-installed utilities that come with the
computer and details how to start them. For further information on their
operation, please refer to each utility’s online manual, help files or
README.TXT file.
Standby If you have to interrupt your work, you can use
this feature to allow you to turn off power to the
computer without exiting from your software. Data
is maintained in the computer’s main memory so
that when you next turn on the power, you can
continue working right where you left off.
TOSHIBA RAID RAID (Redundant Array of Independent Disks)
realizes high performance (striping = RAID0) or
fault tolerance (mirroring = RAID1), which is
configured by arraying multiple independent hard
disk drives.
TOSHIBA Power
Saver To access the power management utility, click
start followed by Control Panel followed by
Performance and Maintenance and then click
the TOSHIBA Power Saver icon.
HW Setup This utility allows you to customize your
hardware settings according to the way you work
with the computer and the peripherals you use.
To access this utility, click start followed by
Control Panel followed by Printers and Other
Hardware and then click the TOSHIBA
HWSetup icon.
TOSHIBA Controls This utility lets you do the following:
■
Buttons: Assign applications to the REC,
Brightness down, Brightness up, DOLBY,
TV-out buttons.
To access this utility, click start followed by
Control Panel followed by Printers and Other
Hardware and then click the Toshiba Controls
icon.