Toshiba Qosmio G30 HD-DVD (PQG32) User Manual
Page 145
User’s Manual
7-7
HW Setup
LAN
Wake-up on LAN
This feature lets the computer’s power be turned on when it receives a
wake-up signal from the LAN.
Power will be automatically turned on when a signal is received from an
administrator’s computer which is connected via a network.
The following settings can be changed when the Built-in LAN is Enabled.
Connect the AC adaptor when using the Wake-up on LAN function. The
battery retention time will be shorted than the times listed in this manual
when this function is enabled. Refer to the section in chapter 6,
Built-in LAN
This feature enables or disables the Built-in LAN.
Device Config
Device Configuration
This option allows you to set how the computer’s hardware devices will be
configured.
Enabled
Enables Wake-up on LAN.
Disabled
Disables Wake-up on LAN (Default).
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
Enabled
Enables Built-in LAN functions (Default).
Disabled
Disables Built-in LAN functions.
All Devices
The computer’s BIOS will setup and configure all
devices.
Setup by OS
The operating system will setup and configure all
of the devices that it can control (default).