Toshiba Qosmio G30 HD-DVD (PQG32) - Manual (Page 144)

7-6 User’s Manual
HW Setup
Network Boot Protocol
This feature sets the protocol to remotely boot from the network.
[PXE] Sets PXE as the protocol (Default).
[RPL] Sets RPL as the protocol.
Keyboard
Wake-up on Keyboard
When this feature is enabled, and the computer is in Standby Mode, you
can turn on the system by pressing any key. However, please be aware that
this option will only work with the internal keyboard and only when the
computer is in Standby Mode.
CPU
This function allows you to set the processor’s operating mode.
Dynamic CPU Frequency Mode
This option allows you to configure the power saving modes associated
with the processor - the following settings are available:
Network Boot Protocol is not displayed for Gigabit Ethernet LAN.
Enabled Enables the Wake-up on Keyboard function.
Disabled Disables the Wake-up on Keyboard function
(Default).
Please note that this option is displayed only on models with an Intel ®
Core™ Duo processor and an Intel ® Core™ 2 Duo processor.
Dynamically
Switchable The processor’s power consumption and
automatic clock speed switching functions are
enabled - in use the processor’s operation is
automatically switched when necessary (default).
Always High The processor’s power consumption and
automatic clock speed switching functions are
disabled - in use the processor will always run at
its highest level of power consumption and its
highest speed.
Always Low The processor’s power consumption and
automatic clock speed switching functions are
disabled - in use the processor will always run at
a lower level of power consumption and a low
speed.