Pioneer AVIC-X1 User Manual
Page 82

80
Chapter 7
Using the AV Source (Pioneer AV Equipments)
AV
You can also perform manual tuning by mov-
ing the joystick left or right.
5
To perform seek tuning, keep touching
or for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
You can cancel seek tuning by touching either
or briefly.
If you keep touching or you can skip
broadcasting channels. Seek tuning starts as
soon as you release the keys.
You can also perform seek tuning by holding
the joystick left or right.
Advanced TV tuner operation
(1) Function display
Shows the function names.
➲ How to display the FUNCTION menu ➞
Page 57
Storing and recalling broadcast
stations
If you touch any of the preset tuning keys P1—
P12 you can easily store up to 12 broadcast sta-
tions for later recall with the touch of a key.
1
When you find a station that you want to
store in memory keep touching a preset
tuning key P1 — P12 until the preset
number (e.g., P.ch: 1) stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected station has been stored in mem-
ory.
The next time you touch the same preset tun-
ing key P1 — P12 the station is recalled from
memory.
To switch between P1 — P6 and P7 — P12,
touch
or .
When the touch panel keys are not displayed,
you can display them by touching the screen.
When P1 — P6 and P7 — P12 are not dis-
played, you can display them by touching
DISP.
❒ Up to 24 stations, 12 for each of two TV
bands can be stored in memory.
❒ You can also use and to recall sta-
tions assigned to preset tuning keys P1 —
P12.
Storing the strongest broadcast
stations sequentially
1
Touch “BSSM” in the FUNCTION menu.
2
Touch “START” to turn BSSM on.
BSSM begins to flash. While BSSM is flash-
ing the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished, BSSM disappears.
To cancel the storage process, touch “STOP”.
❒ Storing broadcast stations with BSSM may
replace broadcast stations you have saved
using P1 — P12.
Selecting the country group
1
Touch “COUNTRY” in the FUNCTION
menu.
2
Touch to select the country group.
Touch until the desired country group
appears in the display.
COUNTRY 1 (CCIR channel) — COUNTRY
2 (Italy channel) — COUNTRY 3 (U.K. chan-
nel) — COUNTRY 4 (OIRT channel)
❒ For the details of country code, refer to the
“Owner’s Manual” of the TV tuner.
(1)
TV
CRB1903B_ENGLISH.book Page 80 Friday, April 30, 2004 9:27 PM