Pioneer AVIC-X1 - Manual (Page 19)

17
Chapter 1
Basic Operation
NAVI/AV
➲ Searching the destination by map ➞
Page 27
10
Route calculation starts automatically.
Route calculation starts. When the route cal-
culation is completed, the map of your sur-
roundings appears. (The route is displayed in
green.)
❒ If you press the POS button during route
calculation, the calculation is cancelled
and the map display appears.
❒ When performing a destination search
with the route already set, select whether
to make the specified area your destina-
tion and search for a new route, or search
for a route via that area.
➲ Adding way points to the route ➞ Page 38
➲ Once searched for, a location is automati-
cally stored in the “Destination History”
➞ Page 40
❒ Once the route is entered the map data for
a certain distance is stored in the naviga-
tion unit. Thus, route guidance can take
place even when the map disc is removed.
➲ Memory navi mode ➞ Page 100
11
Drive in accordance with the screen and
voice information.
Your Navigation System gives you the follow-
ing information with the timing adjusted to
the speed of your vehicle:
• Distance to the next turning point
• Direction of travel
• Road number of the motorway
• Way point (If this is set)
• Your destination
➲ How to view the screen ➞ Page 23
➲ Searching for another route ➞ Page 37
➲ Cancelling route guidance ➞ Page 37
❒ Touching the allows you to hear the
information again.
❒ If you deviate from the route with the Guid-
ance set to St.List Mode or Mixed Mode
and enter a street not recorded on the disc,
the screen changes to Map Mode. When you
return to the route, returns to the original
mode and resumes route guidance.
❒ If you stop at a petrol station or a restaurant
during the route guidance, your Navigation
System remembers your destination and
route Information. When you start the engine
and get back on the road, the route guidance
resumes.
How to view Map Mode screen
This section describes only the items that are dis-
played on the Map Mode screen.
➲ Details of the map screen ➞ Page 23
(1) Current location
(2) Distance to the destination (or distance
to way point)
(3) Estimated time of arrival (or travel time to
your destination)
(4) Memory navi indicator
Flashing green indicates that the data is being
read. When the data reading has completed, this
indicator disappears from the screen.
➲ Memory navi mode ➞ Page 100
Memory navi mode
While the map disc is inserted, you can store the
data on the map disc into the memory of the nav-
igation unit. If the map disc is removed from the
navigation unit after the data is stored, navigation
is performed using the data in the memory
(memory navi mode). In the memory navi mode,
you can play a music CD or DVD video on the
navigation unit while navigation is taking place.
The operation is automatically switched to the
memory navi mode when the map disc is
removed from the navigation unit.
Navigation in the memory navi mode
During the memory navi mode, navigation is per-
formed only using the data read into the memory.
Therefore, some functions are restricted com-
pared with navigation using the map disc (DVD
(2) (1) (4) (3)
CRB1903B_ENGLISH.book Page 17 Friday, April 30, 2004 9:27 PM