Pioneer PDR-F10 - Manual (Page 33)

6 More Recording Features
33
English
En
‘Un-finalizing’ a CD-RW disc
Use this option to return a finalized CD-RW
disc to a non-finalized state, without erasing
any tracks.
1 Press CD-R MENU.
2 Use
4 or ¢ to select ERASE
MODE then press SET.
3 Use
4 or ¢ to select ERASE
TOC? then press SET.
4 Press SET again to start erasing.
Disc erase takes a few minutes to complete.
• Press CANCEL to cancel instead of
erasing.
5 When erasing is complete, press
OPEN / CLOSE .
This completes the operation and makes the
disc ready for recording.
Erasing all tracks from a
finalized CD-RW disc
Use this option to erase all tracks from a
finalized disc. In fact, only the TOC (table of
contents) is erased, so this is much faster than
the disc erase option on page 32.
1 Press CD-R MENU.
2 Use
4 or ¢ to select ERASE
MODE then press SET.
3 Use
4 or ¢ to select ERASE
ALL then press SET.
4 Press SET again to start erasing.
Erasing takes a few minutes to complete.
• Press CANCEL to cancel instead of
erasing.
5 When erasing is complete, press
OPEN / CLOSE .
This completes the operation and makes the
disc ready for recording.