Pioneer PDR-F10 - Manual (Page 22)

5 More Play Features
22
En
Programming the track
order
This mode lets you program a sequence (a
playlist) of up to 24 tracks to play. The order
can be anything you choose. Tracks can
appear more than once in the playlist, or can
be left out entirely. The playlist applies only to
the disc in the recorder at the time. Once you
take the disc out (or switch the power into
standby), the playlist is lost.
CD-R
CD-R
SET MENU
CANCEL
7
4 ¢
1 If the system isn’t already in CD-R
mode, press CD-R then stop
playback.
2 With the disc stopped, press CD-R
MENU.
3 Use
4 or ¢ to select
PROGRAM, then press SET.
4 Select a track to add to the
playlist using the
4 and ¢
buttons.
For example, to add track 3, press
¢ three
times. Or, to add the track before last, press
4 twice.
The currently selected track blinks.
PGM
5 Press SET to add the track to the
playlist.
The display briefly shows the playlist step
number and the track.
PGM
6 Repeat steps 4 and 5 to continue
adding tracks to the playlist.
• If you make a mistake, press
CANCEL to
delete the last (most recent) track
programmed. (Delete multiple tracks by
pressing
CANCEL repeatedly.)
• When no more tracks can be added the
display shows PGM FULL .
7 When you've completed the
playlist, press CD-R MENU.
The playlist can be up to 24 tracks long.
8 Press CD-R to start playback.