Pioneer PDR-F10 - Manual (Page 20)

4 Getting Started
20
En
Recording from
another source
Use this recording method when recording
from the tuner, optional MD or tape deck, or
from a component connected to the auxiliary
inputs.
CD-R
CD
CD-R
AUX
DISP 7
4 ¢
TUNER
TAPE MD
1 Load a CD–R or CD–RW disc.
If it’s a blank disc, the display indicates this.
If the disc isn’t blank, use the DISP button to
check that there’s enough space on it for what
you want to record.
2 Switch to the source that you’re
going to record.
For example, to record from the auxiliary
inputs, press
AUX .
3 Prepare the source for recording.
Switch on the source component, load the
source material, tune to the station, etc.
4 Press REC (top panel only).
The CD-recorder goes into record-pause.
5 Press CD-R to start recording.
Alternatively, press
6 on the top panel.
6 Start playing the source (if
necessary).
7 During recording:
• Press
CD - R (remote) or
6 (top panel)
to pause recording. Press again to restart.
• If auto track numbering is off, press REC
to start a new track (see page 26 for more
on track numbering).
8 When you’re done, press
7 to
stop recording.
After pressing
7, the recorder writes the track
information to the disc.
Take out the disc before switching the player
off.