Brother HL-2060 - Manual (Page 99)

USER’S GUIDE
4–24
AUTO MODE
✒ Note
The settings in this mode menu are effective in the HP LaserJet, EPSON
FX-850, and IBM Proprinter XL modes. They do not appear in other
emulation modes.
The page/line termination is set in this mode.
Display Message Setting Auto Mode
AUTO LF =OFF ON CR
→ CR+LF
OFF CR
→ CR
AUTO CR =OFF ON LF
→ LF+CR, FF → FF+CR, VT → VT+CR
OFF LF
→ LF, FF → FF, VT → VT
AUTO WRAP =OFF ON Line feed and carriage return occur when the printer
position reaches the right margin.
OFF No line feed and carriage return occur when the
printer position reaches the right margin.
AUTO SKIP =ON ON Form feed occurs when the printer position reaches
the bottom margin.
OFF No form feed occurs when the printer position reaches
the bottom margin.
AUTO MASK =OFF ON The printer ignores the top and bottom margin settings
you make with the control panel. The page length is
automatically set to 11” for letter or A4-size paper and
to 14” for legal-size paper.
OFF The printer operates according to the margin settings
you make with the control panel.
✒ Note on “AUTO MASK”
When you use application software in non-HP modes, be sure to set
“AUTO MASK” to ON. When you use letter- or A4-size paper, the top
and bottom 2 lines are masked and they do not appear on the printout.
The auto modes are subject to the current emulation mode.
O : The auto modes can be set.
X : The auto modes cannot be changed and no setting appears.
— : The auto modes are not available.