Service call messages, Service call messages -5 – Brother HL-2060 User Manual
Page 195
CHAPTER 7 TROUBLESHOOTING
7–5
Service Call Messages
Service Call Message Meaning Action
50 FUSER MALF
Malfunction of fuser Turn off the printer. Wait 15
minutes, then turn it on again.
51 LASER BD MALF
Malfunction of laser beam
detector
Turn off the printer. Wait a
few seconds, then turn it on
again.
52 SCANNER MALF
Malfunction of laser scanner
motor
Turn off the printer. Wait a
few seconds, then turn it on
again.
53 DX FAN MALF
Malfunction of fan motor in
the duplex unit
Turn off the printer. Wait a
few seconds, then turn it on
again.
54 MOTOR MALF
Malfunction of main motor Turn off the printer. Wait a
few seconds, then turn it on
again.
55 HIGH VOL MALF
Malfunction of high voltage
power supply
Turn off the printer. Wait a
few seconds, then turn it on
again.
61 PROG ERROR
Program ROM checksum
error
Turn off the printer. Wait a
few seconds, then turn it on
again.
62 FONT ERROR
Font ROM checksum error Turn off the printer. Wait a
few seconds, then turn it on
again.
63 D-RAM ERROR
D-RAM error Turn off the printer. Wait a
few seconds, then turn it on
again.
66 NV-W ERROR
NV-RAM error Turn off the printer. Wait a
few seconds, then turn it on
again.
67 NV-R ERROR
NV-RAM error Turn off the printer. Wait a
few seconds, then turn it on
again.
68 NV-B ERROR
NV-RAM error Turn off the printer. Wait a
few seconds, then turn it on
again.
99 SERVICE
System error Turn off the printer. Wait a
few seconds, then turn it on
again.
48 INCORRECT LT
Your lower tray is not an LT-
2000, and it is not the correct
tray for your 20 ppm printer.
Change to an LT-2000
49 INCORRECT DX
Your duplex unit is a DX-
2000, and it is not correct for
your 2016/17 ppm printer.
Change to an DX-2000.
73 MAINTENANCE 1
Your printer requires a
maintenance 1 service.
73 MAINTENANCE 2
Your printer requires a
maintenance 2 service.