Brother HL-2060 - Manual (Page 26)

CHAPTER 1 GENERAL
1–9
5. The installer program will begin. Follow the instructions on the
computer screen. (Be sure to restart Windows when the installation
process is completed.)
✒ Note
•
The installer automatically updates your SYSTEM.INI Windows file
by adding DEVICE=bi-di.386 under the [386Enh] section. If
any bi-directional parallel communications device driver has
previously been installed, it will be deactivated by this new driver. If
you want to use the driver that was previously installed, you should
re-install your previous driver. However, re-installing the previous
driver will make the HL-2060 series driver inactive.
•
The installer makes the installed printer driver the Windows default.
•
The installer automatically sets the printer port to the parallel
interface,
LPT1 .
•
During this installation, changes have been made to the
SYSTEM.INI file. It is necessary to restart Windows so that the
changes become effective and the installed bi-directional parallel
communications device driver can take effect.