Olympus E-400 - Manual (Page 79)

79
Playback functions
4
4 Playback functions
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow step 1 below.
1
Press the
q (playback) button.
(Single-frame playback)
• The last recorded image appears.
• The LCD monitor turns off after more than
1 minute if no operations are performed.
The camera will turn off automatically if
there is no operation after 4 hours. Turn on
the camera again.
2
Use
p to select images you want to
view. You can also turn the control dial
to switch to U for close-up playback.
Single-frame/Close-up playback
q
Control dial
INFO button p
q button
Press
p to change
the close-up
position.
Press
p to move
the display of the
close-up position.
Press
p to view
frame-by-frame
close-ups.
(Single-frame playback)
(Close-up playback)
Press the
INFO button
a : Displays the frame that
is stored 10 frames back
c : Displays the frame that
is stored 10 frames
ahead
d
: Displays the next frame
b
: Displays the previous
frame
(Close-up position
playback)
Press the
INFO button
(Close-up playback)
• To exit the playback mode, press
the
q button.
• Pressing the shutter button
halfway resumes the shooting
mode.