Olympus E-400 - Manual (Page 108)

108
Usi
n
g
the OL
YMPUS Mas
ter sof
tware
7
Connecting the camera to a computer
Connect the camera to your computer with the provided USB cable.
1
Use the provided USB cable to connect the computer’s USB port to
the camera’s multi-connector.
• The location of the USB port varies with the computer. For details, refer to
your computer’s manual.
2
Set the camera’s power switch to
ON.
• The selection screen for the USB
connection is displayed.
3
Press
ac to select [STORAGE].
Press the
i button.
4
The computer recognizes the camera
as a new device.
• Windows
When you connect the camera to the
computer for the first time, the computer
automatically recognizes the camera. Click [OK] when the message saying
that the installation is completed appears.
The computer recognizes the camera as a [Removable Disk
].
• Macintosh
iPhoto is the default image management application for Mac OS. When you
connect your Olympus digital camera for the first time, iPhoto will start up
automatically. Close iPhoto and start OLYMPUS Master.
x Notes
• When the camera is connected to the computer, none of the camera buttons
are functional.
Look for this mark.
USB port Terminal
Multi-connector
Smaller terminal
USB cable