Olympus E-400 - Manual (Page 103)

103
Direct printing (PictBridge)
Printi
ng
6
Connecting the camera to a printer
Use the provided USB cable to connect the camera to a PictBridge-compatible
printer.
1
Turn the printer on and connect the camera’s multi-connector to the
printer’s USB port with the USB cable
• For details on how to turn the printer on and the position of the USB port,
refer to the printer’s manual.
2
Turn on the camera.
• The selection screen for the USB connection is displayed.
3
Use
p to select [<EASY] or
[
<CUSTOM].
If you select [
<EASY]
• Go to “Easy printing” (P. 104).
If you select [
<CUSTOM]
• [ONE MOMENT] is displayed and the
camera and printer are connected.
Go to “Custom printing” (P. 104).
x Notes
• If the screen is not displayed after a few minutes, disconnect the USB Cable
and start again from Step 1.
Multi-connector