Setting the flash mode, Using the built-in flash, Setting the flash mode using the built-in flash – Olympus E-400 User Manual
Page 48: P. 48
48
Flash shooting
Shooting functions
k
V
a
rious shooting function
s
3
Setting the flash mode
# button Control dial
i
p: FLASH MODEi
Using the built-in flash
If you shoot a subject using a lens that is wider than 14 mm (equivalent to 28
mm on a 35 mm film camera), the light emitted by the flash may produce a
vignette effect. Whether or not vignetting occurs also depends on lens type
and shooting conditions (such as distance to the subject).
1
Press the
# button to raise the
built-in flash.
• The built-in flash will pop up
automatically and fire in low light
conditions under the following modes.
AUTO/i/&///I/U/G/J/r/
g/
B/A
2
Press the shutter button halfway.
• The
# (flash stand-by) mark lights when the
flash is ready to fire. If the mark is blinking,
the flash is charging. Wait until charging is
complete.
3
Press the shutter button all the way.
TIPS
When you do not want the flash to pop up automatically:
JSet [AUTO POP UP] on the menu to [OFF].
Direct buttons
Control panel screen
# button
Flash stand-by
mark
Viewfinder