Olympus E-400 - Manual (Page 36)

36
A
: Aperture priority shooting
Shooting functions
k
Selecting the
appropr
ia
te mode for
shoo
ting
3
Display in the viewfinder when the shutter button is pressed halfway
TIPS
The shutter speed indication does not stop blinking after the aperture
value is changed:
J If the shutter speed indication is blinking when set to a high speed, set the ISO
sensitivity to a lower value or use a commercially available ND filter (for adjusting
the amount of light).
g “ISO k Setting the desired sensitivity to light” (P. 69)
J If the shutter speed indication is blinking when set to a lower speed, set the ISO
sensitivity to a higher value.
g “ISO k Setting the desired sensitivity to
light” (P. 69)
To check the depth of field with the selected aperture value:
J Refer to “Preview function” (P. 40).
Overexposed when the shutter speed
indication is blinking. Increase the aperture
value (f-number). Underexposed when the shutter speed
indication is blinking. Decrease the
aperture value (f-number).
Viewfinder
Shutter speed
Aperture value
AF confirmation
mark
Exposure mode
Shutter speed
Aperture value
AF confirmation
mark
Exposure mode
Viewfinder